• 联系人:朱经理
  • 电话:18764425935
  • QQ:975477717
  • 地址:小清河北路与济泺路交叉口向西
  • 500米路北泺口广告材料市场2号楼
新闻中心当前位置:首页-新闻中心
    烫钻加工是如何制作的?
    2018-10-17 18:41:45

    烫钻加工是如何制作的?压烫机、家用熨斗或打火机:
    How to make hot drilling? Pressing machine, household iron or lighter:
    1.把烫钻图案下面的一层带纹路的白色衬底揭去,再把粘着钻图的粘纸摆放到衣服上您认为合适的位置,用手压平,使带着钻图的粘纸粘在衣服上。
    1. Remove a layer of white striped substrate under the hot drill pattern, and then place the sticky paper adhered to the drill pattern on the clothes where you think it is appropriate. Flatten it by hand so that the sticky paper adhered to the clothes with the drill pattern.
    2.电熨斗调到“棉”的一档[相当于150度],蒸汽熨斗不要开蒸汽或不要放水,干熨就行。把衣服放到一个较平的操作面,有时为了熨的更结实,可以在操作面上再垫上一层或两层毛巾。用力把熨斗压在烫图上,熨十三秒左右,如果烫图较大,电熨斗不能一次覆盖,就反复在烫图上移动熨斗,使整个烫图均匀受热。同时熨烫时间也相应延长一些。
    2. The electric iron is set to the first gear of "cotton"[equivalent to 150 degrees]. The steam iron should not boil steam or discharge water, just dry iron. Place the clothes on a flat surface. Sometimes you can put one or two layers of towels on the surface in order to iron them more firmly. Press the iron on the ironing drawing forcefully, ironing for about 13 seconds. If the ironing drawing is large, the electric iron can not be covered at one time, move the iron repeatedly on the ironing drawing, so that the whole ironing drawing is heated evenly. At the same time, the time of ironing is lengthened.
    3.熨烫完,等烫图冷却以后再把表面那层粘纸揭下,一幅精美的烫图就操作完成了。

    济南丝网印刷
     3. After ironing, after the ironing drawings are cooled, then the surface layer of sticky paper is uncovered, a beautiful ironing drawings on the operation is completed.
    注意:因为大多数电熨斗带蒸汽,电熨斗下都是小孔影响受热,因此在熨烫时要来回移动熨斗,使受热均匀。这样烫出的烫图才会牢固。
    Note: Since most electric irons are steam-laden, small holes affect the heating under the iron, so move the iron back and forth during the ironing to make the heating uniform. The hot stamping will be firm.
    本文来源:济南丝网印刷,更多相关资讯请点击:http://www.sopacmarine.com/。
    The source of this article is Ji'nan screen printing. For more information, please click: http://www.sopacmarine.com/.