• 联系人:朱经理
  • 电话:18764425935
  • QQ:975477717
  • 地址:小清河北路与济泺路交叉口向西
  • 500米路北泺口广告材料市场2号楼
新闻中心当前位置:首页-新闻中心
    交通标牌制作的流程介绍!
    2018-12-20 10:45:41

    交通标牌是标识标牌制造职业中非常重要的一项作业内容,在现代社会生活中具有极为重要的效果。因为交通标牌标识不同于其他一般的商业广告标识,因而制造加工也具有不同的工艺要求标准。关于交通标牌制造的首要工艺流程,济南标识标牌制造职业的专业人员来为我们介绍一下。
    Traffic sign is a very important job in the trademark manufacturing profession. It has a very important effect in modern social life. Because traffic signs are different from other general commercial advertisement signs, manufacturing and processing also have different technological requirements. As for the primary technological process of traffic sign manufacturing, professionals of Jinan sign manufacturing profession will introduce it to us.
    1、首先进行铝板、铝滑槽的下料,标牌制造的板材尺度与误差一定要符合相关标准规则,经过取舍切开后边缘不得呈现毛刺,外表没有皱纹、凹痕、变形等状况。标牌板材的背面一般采用氧化处理为不反光的暗灰色效果,标识板材外形尺度允许存在0.5%之内的误差。
    1. First of all, the cutting of aluminium plate and aluminium chute should be carried out. The scale and error of the plate made by the label must conform to the relevant standard rules. After cutting, the edge should not show burrs, and there are no wrinkles, dents and deformations on the surface. The back of the plate is usually treated by oxidation as a dark gray effect without reflecting light. The dimension of the plate is allowed to have an error of less than 0.5%.
    2、对板材的铝滑槽进行钻眼加工,铆接标识牌版面。

    济南丝网印刷
    2. Drilling the aluminium chute of sheet metal and riveting the logo plate.
    3、完结铆接作业后对标志板材进行清洁后晾晒,然后对版面进行粘膜底膜、字膜排版、刻字、粘贴等处理作业,交通标牌的形状、图画、色彩与文字等都需求严格遵守《道路交通标志和标线》的规则。
    3. After the riveting operation, the logo board is cleaned and dried, and then the layout is processed by mucous membrane, typesetting, engraving and pasting. The shape, pictures, colors and characters of the traffic signs need to strictly abide by the rules of "Road Traffic Signs and Lines".
    4、贴反光膜,为防止反光膜粘贴呈现接缝,需求上侧膜压住下侧膜,拼接处有3~6mm的堆叠部分,一端向另一端延伸边贴边拆下膜后封层,并用专业设备压实,防止呈现气泡褶皱。标牌外表不得呈现明显的色泽或反射不均匀状况。
    4. To prevent reflective film from appearing seams, the upper side film is required to press down the lower side film. There are 3-6 mm stacked parts at the splicing point. The back seal of the film is removed at the edge of one end extending to the other end, and is compacted with professional equipment to prevent bubble folding. The appearance of the sign shall not show obvious color or uneven reflection.
    网印版印刷面与承印物外表之间的间隔就被称为网距。两者之间保持一定的间隔能够防止网版与承印物彼此粘接,形成印刷质量问题。网距的效果防止了这一状况的呈现,使网版只在刮刀刮印时接触承印物,一旦刮刀刮过,网版回弹,网版与承印物瞬间脱离,就不会发作拖墨和蹭脏等现象。其间回弹间隔与网距关系密切,但不同于网距。首要是指刮刀刮墨往后网版缓慢向上弹回的间隔,发作于印刷起点,只在刮刀刮印过程中呈现,促使网版敏捷弹回脱离承印物
    The interval between the printing surface and the surface of the impression is called screen spacing. Keeping a certain interval between the two can prevent the screen plate and the substrate from sticking to each other and form printing quality problems. The effect of screen spacing prevents the appearance of this situation, so that the screen plate only touches the prints when the scraper scratches. Once the scraper scratches, the screen plate rebounds, and the screen plate and the prints are separated instantaneously, there will be no ink dragging and dirty phenomena. The springback interval is closely related to the net distance, but different from the net distance. First of all, it refers to the interval between scraper scraping inks and screen plate rebounding slowly upward, which occurs at the starting point of printing and only appears in the scraper scraping process, thus prompting screen plate to rebound quickly from the substrate.
    经过以上几个首要的过程,交通标牌制造作业基本就完结了,更多关于标识标牌规划制造,丝网印刷等方面的相关内容知识欢迎联络咨询
    After the above several primary processes, the traffic signs manufacturing operation is basically over. More information about the planning and manufacturing of signs, screen printing and other related content is welcome to contact and consult.